Skip to content

Fault codes don’t tell the whole story. Prepare your next step.

Connect the vehicle, symptoms and available information to organize leads and checks. You measure, you confirm, you decide.

3 free diagnostics · No credit card required

Nicolas, technician, and Mehdi, electrical diagnostic technician, review a diagnosis on a tablet beside an engine.
Your expertise stays at the centre.

Suggested leads help you choose your checks. You confirm them on the vehicle.

When the first checks are not enough.

Some cases need the available information put in order before you can move forward.

Several faults appear together

Before linking everything to one fault, distinguish the systems involved. Review the symptoms and observations that give the codes meaning.

A part has already been replaced

A replacement does not explain the remaining fault on its own. Record what was done and revisit the information that still supports each lead.

One reading does not tell the whole story

Keep its measurement conditions: vehicle, engine state and when it occurred. An isolated observation may need another check.

Five fault codes. One clear reading.

Diagolia organizes your DTC codes, explains the leads and shows what to check first.

Step 01 · Case input

Gather the useful information

The same real case will be followed through all four steps.

Technical context structured
Vehicle

PEUGEOT 2008 IIRecognized

Fault codes

P16D0P208EP20A2P20E8P15A0

Workshop signal

Engine warning with several faults recorded together.

Context

131,892 km · diagnosis in progress

Registration (masked) · •• ••• ••

You perform the checks. Diagolia structures the reasoning.

Distinguish available information, hypotheses and your technical decision at every step.

  1. Set out the case

    You

    You record the vehicle, codes and symptoms.

    Diagolia

    These elements are brought together in the diagnostic context.

  2. Examine the leads

    You

    You compare suggestions with what you have observed.

    Diagolia

    Possible causes and their explanations guide your review of the case.

  3. Prepare the checks

    You

    You choose appropriate checks and carry them out on the vehicle.

    Diagolia

    Recommended checks help you prepare measurements and inspections.

  4. Decide what comes next

    You

    You confirm or rule out a hypothesis using the evidence gathered.

    Diagolia

    The reasoning supports your work; technical validation remains yours.

From a fault code to a useful check.

Understand what supports a lead so you can choose the next check methodically.

Put faults in context

A code alone is not enough. Gather symptoms, observations and vehicle information before choosing a lead.

Understand possible causes

Identify what supports a lead and what still needs confirming. Sources and explanations help you examine the hypotheses.

Prepare useful checks

Compare proposed checks with measurements and inspections carried out on the vehicle.

A practical case

Five codes do not mean one fault.

The Peugeot 2008 II case above groups five codes into three systems: AdBlue/SCR, oil pressure and flywheel. Examine each branch separately, then compare the leads with checks on the vehicle.

  • The vehicle and its symptoms first
  • Leads separated by system
  • Checks before conclusions
Explore fault code analysis

Your workshop questions, answered.

What to know about bringing Diagolia into your workflow.

Does Diagolia replace my scan tool?

No. It uses information already collected and supports the reasoning process. Measurements and checks on the vehicle are still needed.

Is a suggested cause certain?

No. Leads must be checked in the context of the vehicle. The final decision stays with the technician.

Can I start with incomplete information?

You can organize the available information, but missing information may limit the analysis. Add useful observations before reaching a conclusion.

What information can I cross-check?

Fault codes, symptoms, measurements, technical documentation, web research, field cases and added photos, depending on your plan and the available information.

Still have a question?

Contact us

Explore more

Do you manage a workshop?

Repair shops and workshop managers

Ready to diagnose with more confidence?

Create your account and start your first 3 diagnostics for free.

Try Diagolia for free 3 free diagnostics · No credit card required