What should the workshop check before restitution?
After assembly
The professional puts the pads back in position and checks that the pedal reaches a firm and stable point before restitution.
During break-in
The friction surfaces gradually come into contact. A pedal that continues to depress requires immediate control.
Level or indicator
Communicate any braking alerts. A visible level between the marks is not enough to confirm that the braking is working correctly.
Feeling alone does not allow you to distinguish a hydraulic problem from an assembly problem. Let the workshop check the circuit and the work carried out. A supplement or a road test does not remove the doubt.
What to say at the workshop?
- Works
- Date of return, axle concerned and parts shown on the invoice.
- Appearance
- First pressure when handing over the keys or change felt afterwards.
- Alert
- Exact message, indicator and level visible without opening the jar.
Example of message to adapt
“The front pads were replaced yesterday. On first use, the pedal went down further than usual. The vehicle is immobilized. I didn't check the level. »
FAQ
Frequently asked questions
Should I ride to break in the pads?+
With a soft or descending pedal, immobilize the vehicle and call the garage or assistance. Running-in concerns the friction surfaces.
What to note if the jar is inaccessible?+
Indicate that the level remains unknown. If the marks are visible without manipulation, simply describe the level observed with the vehicle stopped.
Technical sources
Prepare the diagnosis with Diagolia
Gather available observations and readings to help the shop decide on next checks.
