Why does the indicator remain displayed?
The pressure drops again
Identify the wheel and keep both measurements with their dates. A repeated loss merits a tire, valve and wheel check.
Cold pressures are correct
Compare each wheel to the vehicle label, taking into account the load. Then consult the instructions to find out if initialization is planned and under what conditions.
Monitoring is unavailable
Copy the exact message. The system may need diagnostics, especially after changing wheels. Continue to refer to the pressures actually measured.
A direct system uses pressure sensors. An indirect system uses the rotational speed of the wheels in particular. On the Clio IV mentioned, the indirect system reference is adjusted after adjusting the pressures. The sequence depends on the vehicle.
What to send before a reset?
- Measurements
- Cold pressure of each wheel, unit and reference value.
- History
- Tire change, rotation or recent intervention.
- Display
- Exact message and possible reset already carried out.
Example of message to adapt
“Right front wheel: […] cold, then […] the next day. Value indicated on the label for this load: […]. The wheels were changed on […]. The handset displays […]. »
FAQ
Frequently asked questions
Can I use the same pressure for all wheels?+
The label or instructions give the expected values for each axle, the mounting and the load. Note them before comparing.
Does the light off confirm the repair?+
The disappearance of the alert does not demonstrate that the tire is retaining its pressure. A further decline must be examined.
Technical sources
Prepare the diagnosis with Diagolia
Gather available observations and readings to help the shop decide on next checks.
